HIKVISION iDS-TCM403-A - Vehicle Capture and Recognition Service

10.9.2 Vehicle Capture and Recognion Service
Set the vehicle capture and recognion service to debug the device.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Advanced → Vehicle Capture and Recognion Service .
2.
Check the service(s) according to your needs.
Note
The supported services vary with dierent models. The actual device prevails.
Filter Checkpoint Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many mes during a short period in the scene, the checkpoint pictures of the vehicle will not
be captured.
Note
For some models, you can set Eecve Time of Filtering.
Enable Turning Trac Flow Stascs
In video analysis E-police mode, the turning trac ow stascs will be uploaded to the
connected
plaorm.
Filter Violaon Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many mes during a short period in the scene, the violaon pictures of the vehicle will not be
captured.
Not Add No.
Aer Violaon Type
The No. of the captured pictures will not be added aer the overlaid violaon type on the
pictures.
Filter Violaon Capture of Motorcycle
The violaon pictures of motorcycles will not be captured.
Do Not Capture Reverse-driving Vehicle
The reverse-driving vehicles will not be captured. For example, if you need to capture the
vehicles driven from the west to the east, enable the
funcon and the vehicles driven from
the east to the west will not be captured.
Disable Motorcycle Speed Detecon
The speeds of motorcycles will not be detected.
Network Trac Camera Operaon Manual
52