UM DS-2CCx2D9T-xxxx 022520NA (UD02874B-A) 48
If you select shutter as AUTO or 1/25, SENS-UP is
adjustable (OFF/AUTO), and SENS-UP is disabled if any
other shutter speed is selected.
• AGC: A form of amplification where the camera will automatically
boost the image output signal to optimize the image clarity in
poor light conditions. You can set the AGC value from 0 to 15. AGC
is disabled if the value is set to 0.
The noise will be amplified if AGC is on.
• SENS-UP: Increases the exposure of a signal frame, which makes
the camera more sensitive to light so it can produce images even
in low lux conditions. You can set the SENS-UP as OFF or AUTO,
according to the light condition.
- OFF: SENS-UP function is disabled.
- AUTO: SENS-UP function will automically adjust itself to x2, x4,
x6, x8, x10, x15, x20, x25, or x30 according to the light
condition.
• BRIGHTNESS: Brightness of the image. You can set the brightness
value from 1 to 100 to darken or brighten the image. The higher
the value, the brighter the image.
• D-WDR (Digital Wide Dynamic Range): Helps the camera provide
clear images even under backlight circumstances. When there are
both very bright and very dark areas simultaneously in the field of
view, D-WDR balances the brightness level of the whole image
and provides clear images with details.
Set the D-WDR to ON to improve the image quality in backlight
environments.
Set the D-WDR to OFF to disable the function.
• DEFOG: Used in special environments such as foggy or rainy
To Next Page
Loading...
