What does 'Expander Low Battery' mean on my Hills Reliance system?
Expander Low Battery on your Hills Reliance system means that an expansion device connected to the system has a low battery. Replace the battery.
What does 'Expander Box Tamper' mean on my Hills Reliance system?
Expander Box Tamper on your Hills Reliance system indicates that an expansion device connected to the system has a tamper activated. Check the tamper contacts on the expansion devices connected.
What does 'Expander Power' mean on my Hills Control Panel?
General| Brand | Hills |
|---|---|
| Model | Reliance 12 |
| Category | Control Panel |
| Language | English |
Wiring diagram for the Hills Reliance 128 security system, detailing connections for zones, power, and peripherals.
Wiring diagram for the Hills Reliance R12 security system, showing panel connections and device wiring.
Wiring diagram for the Hills Reliance 8 security system, illustrating panel connections and component layout.
Detailed description of each terminal on the Hills Reliance 128 control panel.
Detailed description of each terminal on the Hills Reliance 12 control panel.
Detailed description of each terminal on the Hills Reliance 8 control panel.
Explains system areas, arming modes, and user codes for system operation.
Details options like auxiliary outputs, tampers, and timers.
Guides setting zone start, options, and number for LED code pads.
Covers service menu access and changing user codes.
Defines the access permissions and areas for each user code.
Enables zone testing mode for verification of sensor functionality.
Configures remote access for system programming and updates.
Explains the Features, Segments, and Options structure and how to navigate.
Restores the panel to its original factory settings.
Describes how the system detects and registers connected modules.
Details Master, Duress, and Go To Program codes.
Configures dialing, communication, and download settings.
Configures the entry and exit delay times for Area 1.
Assigns zone types to zones 1 through 8.
Lists predefined zone types and their characteristics.
Assigns zones 1-8 to specific operational areas.
Configures system-wide parameters like siren behavior and power alerts.
Sets durations for various system functions like strobe and siren.
Details logic, events, and timing for auxiliary outputs 1-4.
Configures automatic system testing parameters.
Sets daily operating hours and user code authority.
Schedules automatic arming based on the day of the week.
Sets account codes for specific reporting areas.
Configures Area 2 options and communication reports.
Sets entry/exit timers for Area 2.
Configures Area 3 options and communication reports.
Sets entry/exit timers for Area 3.
Configures Area 4 options and communication reports.
Sets entry/exit timers for Area 4.
Configures Area 5 options and communication reports.
Sets entry/exit timers for Area 5.
Assigns zone types to zones 17 through 24.
Assigns zones 17-24 to specific operational areas.
Assigns zone types to zones 33 through 40.
Assigns zones 33-40 to specific operational areas.
Sets Contact ID event codes for Group 1 alarms.
Sets Contact ID event codes for Group 2 alarms.
Defines characteristics for Configuration Group 2 zone behavior.
Defines characteristics for Configuration Group 3 zone behavior.
Assigns zone types to zones 49 through 56.
Assigns zones 49-56 to specific operational areas.
Assigns zone types to zones 105 through 112.
Assigns zones 105-112 to specific operational areas.
To Next Page