Hilltip htrack - Datasheet View Reporting; Datasheet Mode Usage; Set Time Interval for Datasheet; Select Data Type

HTrack
REPORTS
Datasheet view Reports → Datasheet view
Use the datasheet mode when you need to summarize data for longer periods of time. The data
will be summarized in tables, and not on a map.
Start - End
Set a time interval: Insert start and end time to show details for the selected customer or vehicle
during a specic time interval.
Type
You can choose to view details for all or a specic customer/contract or vehicle.
Operating mode
Select which activity/activities should be shown in the summary.
Spreading material
Check the spreading materials you want to be shown in the summary. For SprayStriker
applications, please select “Liquids only”.
Calculations
Check which attributes should be calculated in the summary report.
Click SEARCH to show details for the set attributes.
Oy HillTip Ab
Pukkisaarentie 6
FIN-68600 Pietarsaari
Finland
+358 50 5983 026
+358 50 3659 415
www.hilltip.com
info@hilltip.com
Specications and other details are subject to change without notice.