What to do if automatic leveling doesn’t work on Hilti Laser Level?
If the automatic leveling on your Hilti Laser Level isn't working, it could be due to the tool being placed on a surface that is too inclined. Try turning the rotary switch to the correct position. If that doesn't resolve the issue, the inclination sensor may be faulty and require repair by Hilti Service.
What to do if Hilti PM 40-MG Laser Level can be switched on but no laser beam is visible?
If your Hilti Laser Level can be switched on but no laser beam is visible, it could be due to a faulty laser source or laser control unit, requiring repair by Hilti Service. Alternatively, the temperature may be too high or too low; allow the tool to cool down or warm up.
How to fix Hilti PM 40-MG that can’t be switched on?
If your Hilti Laser Level can’t be switched on, the battery may be low. Try charging the battery. Also, make sure the battery is correctly fitted and securely seated in the tool. If the problem persists, the tool or rotary switch may be faulty, and you should have the tool repaired by Hilti Service.
What to do if individual laser beams don’t function on Hilti Laser Level?
If individual laser beams don’t function on your Hilti Laser Level, the laser source or laser control unit is likely faulty. In this case, you should have the tool repaired by Hilti Service.
What to do if my Hilti Laser Level won't switch on?
If your Hilti Laser Level won't switch on, there are a couple of things you can check: * The battery might be low, so try charging it. * Also, ensure the battery is correctly fitted and securely seated in the tool.
What to do if the automatic leveling doesn't work on my Hilti Laser Level?
If the automatic leveling isn't working on your Hilti Laser Level, it could be due to a couple of reasons: * The tool might be standing on an excessively inclined surface. In this case, turn the rotary switch to the appropriate position to resolve the issue. * If that doesn't work, the inclination sensor may be faulty.
Why does my Hilti Laser Level turn off after 1 hour?
If your Hilti Laser Level switches off after 1 hour, the automatic switch-off feature might be activated. To deactivate it, press the selector button for longer than 4 seconds.
Why does my Hilti PM 40-MG Laser Level switch off after 1 hour?
If your Hilti Laser Level switches off after 1 hour, it's likely that the automatic switch-off feature has been activated. To deactivate it, press the selector button for longer than 4 seconds.
What to do if my Hilti PM 40-MG can be switched on but no laser beam is visible?
If your Hilti Laser Level switches on but no laser beam is visible, it could be due to the temperature being too high or too low. Allow the tool to cool down or warm up.
General| Type | Line/Point level |
|---|---|
| Product color | Black, Red |
| International Protection (IP) code | IP54 |
| Laser class | 2 |
| Maximum range | 40 m |
| Country of origin | Germany |
| Color of laser beam | Green |
| Leveling accuracy (±) | 0.2 mm/m |
| Self-leveling range (±) | 3 ° |
| Maximum range (with receiver) | 100 m |
| Operating time | 10 h |
| Battery included | No |
| Package depth | 50 mm |
| Package width | 80 mm |
| Package weight | 2000 g |
| Quantity per shipping (inner) case | 1 pc(s) |
To Next Page
