Need help?Do you have a question about the Hilti PML 32 and is the answer not in the manual?
General| Self-Leveling | Yes |
|---|---|
| Self-leveling range at room temperature | ±4 ° |
| Operating time | up to 30 hours |
| Operating temperature range | -10 °C to +50 °C |
| Laser class | Class 2 |
| Direction of laser lines | Horizontal and Vertical |
| Battery Capacity | 2.6 Ah |
| IP Rating | IP54 |
| Power Source | Battery |
| Laser Type | 635 nm |
Step-by-step guide for replacing batteries, emphasizing correct polarity and compartment closure.
Instructions on opening the tool and aligning the reference line for operation.
How to activate horizontal, vertical, or both laser beams using the selector button.
Procedure for locking the pendulum to use the tool on inclined surfaces.
Steps to turn off the tool manually or noting the automatic switch-off feature.
Procedure to verify the horizontal laser line's accuracy using target plates.
To Next Page
