10
5. Safety precautions
–Do not render safety devices ineffective and do not
remove information and warning notices.
–Keep laser tools out of reach of children.
–Have the tool repaired only at a Hilti service centre.
Failure to follow the correct procedures when opening
the tool may cause emission of laser radiation in
excess of class 2.
–Do not expose the tool to rain or snow and do not use
it in damp or wet environments or where there may be
a risk of explosion.
5.3 Proper organization of the workplace
– Secure the area in which you are measuring and take
care to avoid directing the beam towards other
persons or towards yourself while setting up the tool.
–Avoid unfavorable body positions when working on
ladders or scaffolding. Make sure you work from a
safe stance and stay in balance at all times.
–Measurements taken through panes of glass or other
objects may be inaccurate.
– Ensure that the tool is set up on a steady surface (not
subject to vibration).
–Use the tool only within its specified limits.
To Next Page
Loading...
Need help?
General
