Need help?Do you have a question about the Hilti PR 15 and is the answer not in the manual?
General| Self-Leveling | Yes |
|---|---|
| Self-Leveling Range at Room Temperature | ±4 ° |
| IP Rating | IP 54 |
| Operating Temperature Range | -10 °C to +50 °C |
| Laser Class | Class 2 |
| Battery Type | Li-ion |
| Storage Temperature | -20 °C to +70 °C |
| Laser Type | 635 nm |
| Operating Time | up to 20 hours |
Explains risks associated with improper tool usage, leading to severe injury or accidents.
Provides guidance to help users employ the instrument efficiently and correctly.
Describes the PR 15's core functionality, operating modes, and laser beam features.
Identifies and explains the various buttons, LEDs, and physical controls on the device.
Details the layout and functions of the PR 15's main control panel interface.
Provides essential steps for quickly setting up and operating the PR 15.
Lists detailed specifications, performance metrics, and physical characteristics of the PR 15.
Lists all components and accessories included in the PR 15 package.
Explains the function, components, and usage of the beam catcher accessory.
Details the laser safety class and associated warnings for user protection.
Outlines the specific uses and applications for which the PR 15 laser tool is designed.
Discusses potential interference issues between the PR 15 and other electronic devices.
Provides essential rules for safe operation, handling, maintenance, and storage of the tool.
Step-by-step guide for correctly installing batteries into the PR 15.
Instructions for setting up and operating the PR 15 in horizontal alignment mode.
Instructions for setting up and operating the PR 15 in vertical alignment mode.
Instructions for setting up and operating the PR 15 in inclined plane mode.
Guide for using the beam catcher with the PR 15 for distances up to 30m.
Guide for using the manual detector with the PR 15 for distances up to 100m.
Procedure to verify the horizontal accuracy and alignment of the PR 15.
Procedure to verify the vertical accuracy and alignment of the PR 15.
Instructions for adjusting the tool's X, Y, and Z axes for optimal accuracy.
Procedure to check for and correct oblique error in the laser beam alignment.
Details the manual detector accessory for extended range and low light conditions.
Describes the measuring rod accessory used for height measurements.
Information on various tripods compatible with the PR 15 for job site setup.
Describes the wall mounting bracket for secure tool installation on a wall.
Details FCC compliance, warnings, and required labeling for the device.
To Next Page
