53
Quick-start instructions
1. Product information
Horizontal mode
Switch on using ON/OFF button . Operation LED
lights up green. Alignment takes place automatically
(within 30 s). X and Y LEDs on the control panel light
up green.
LED Axis (X/Y)
green levelled
red inclined
off fixed
Inclined plane mode
Press Incline button . Incline LED lights up orange.
1 Set X direction using servo button .
Y direction is automatically (servo) levelled.
2 Set Y direction using servo button .
X direction remains inclined as before.
3 Adjust X incline using servo button if necessary.
Y direction remains inclined as before.
Repeat steps 2 and 3 as often as required until
desired incline (X/Y) is achieved.
To Next Page
Loading...
Need help?
General
