11
5. Safety precautions
5.3.1 Electromagnetic compatibility
Although the tool complies with the strict requirements
of the relevant directives, Hilti cannot entirely rule out
the following possibilities:
– The tool may cause interference to other equipment
(e.g. aircraft navigation equipment).
– The tool may be subject to interference caused by
powerful radiation, which may lead to incorrect
operation.
Check the accuracy of the tool by taking measurements
by other means when working under such conditions or
if you are unsure.
5.3.2 Laser classification
The tool conforms to laser class 2 based on the
IEC825-1 / EN60825-01 standard and class II based on
CFR 21 § 1040 (FDA). The eyelid closure reflex protects
the eyes when a person looks into the beam
unintentionally for a brief moment. Nevertheless, the
eyelid closure reflex may be negatively affected by
medicines, alcohol or drugs. This tool may be used
without need for further protective measures.
Nevertheless, as with the sun, one should not look
directly into sources of bright light. Do not direct the
laser beam toward persons.
Laser information plates based on IEC825 / EN6082-01:
To Next Page
Loading...
Need help?
General
