14
6. Operation
6. Operation
6.1 Inserting new batteries
-NOTE-
Do not use damaged batteries.
Do not mix old and new batteries. Do not mix batteries of different
makes or types.
1. Bring the two parts of the tool into the closed
position.
2. Press the battery compartment release button.
3. Pull the battery holder downwards out of the tool.
4. Replace the batteries.
-CAUTION-
Take care to observe correct polarity when inserting
the batteries.
5. Close the battery compartment. Check that it
engages securely.
To Next Page
Loading...
Need help?
General
