Hilti SIW 22-A - Page 16

14 English
5.7 Setting the torque
▶ Press the torque selector button as many times as necessary until the desired torque setting is indicated
to the left of the button.
SID 14A
SID 22A
Model SID … → page 10
SIW 14A
SIW 22A
Model SIW … → page 10
5.8 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.9 Screwdriving
WARNING
Risk of injury and damage. Screws/bolts or the workpiece may be damaged by excessively high
torque; this may also lead to serious injury.
▶ Ensure that the fastener and attachment will withstand the level of torque generated by the tool.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Use the torque selector button to set the desired torque. → page 14
Printed: 06.06.2017 | Doc-Nr: PUB / 5155094 / 000 / 03