Why does my Hilti SID 2-A get so hot?
If your Hilti Power Screwdriver or its battery becomes very warm, there could be an electrical fault or the tool might be overloaded. Immediately switch off the power tool, remove the battery, keep it under observation, and allow it to cool down. If the tool is overloaded, select a suitable power tool for the application. If there is an electrical fault, contact Hilti Service.
What to do if Hilti SID 2-A Power Screwdriver speed drops?
If the running speed of your Hilti Power Screwdriver suddenly drops considerably, the battery may be low. Change the battery and charge the empty battery.
How to fix a Hilti SID 2-A that won't turn on?
If the Hilti Power Screwdriver does not work, the battery may not be fully inserted. Push the battery in until it engages with an audible click.
Why is the control switch stuck on my Hilti SID 2-A?
If the control switch of your Hilti Power Screwdriver cannot be pressed or is stuck, the forward/reverse selector switch may be in the middle position. Push the forward/reverse switch to the left or right.
Why does the Hilti SID 2-A Power Screwdriver battery drain fast?
If the battery of your Hilti Power Screwdriver runs down more quickly than usual, it could be due to a very low ambient temperature. Allow the battery to warm up slowly to room temperature.
What to do if the Hilti SID 2-A battery won't click in?
If the battery of your Hilti Power Screwdriver doesn’t engage with an audible click, the retaining lugs on the battery may be dirty. Clean the retaining lugs and engage the battery in the working position.
General| Brand | Hilti |
|---|---|
| Model | SID 2-A |
| Category | Power Screwdriver |
| Language | English |
Read this documentation before initial operation or use for safe handling.
Defines signal words, documentation symbols, and illustration symbols for hazard understanding.
Details symbols found on the product itself, like DC current and rotation direction.
Provides details on product type, generation, and serial number for user reference.
States compliance with applicable directives and standards for the product.
Covers work area safety, electrical safety, and personal safety for power tool operation.
Specific safety advice for drill/drivers, focusing on insulated surfaces and wiring.
Visual guide and labeling of the product's main components and features.
Defines the product's purpose as a cordless impact screwdriver for specific fastening tasks.
Explains how to interpret the LED indicators for battery charge levels.
Lists the components included with the impact screwdriver, including manuals.
Provides key specifications like rated voltage, weight, and speed for the SID 2-A.
Details battery operating voltage and ambient/storage temperature ranges.
Instructions for safely and correctly installing the battery pack into the tool.
Procedure for powering on the tool, including speed control via the switch.
Simple steps to deactivate the tool by releasing the control switch.
How to adjust the forward/reverse switch for driving or removing screws.
Step-by-step guide to securely attach bits or sockets to the tool's chuck.
Instructions on safely detaching accessories, with a caution for hot or sharp tools.
Guide to attach the optional belt hook for convenient carrying.
Guidelines for cleaning the tool, including air vents and casing materials.
Advice on keeping Li-ion batteries clean, dry, and free from oil and grease.
Instructions for regular checks of parts, controls, and repairs by Hilti Service.
Recommendations for transporting tools and batteries safely, emphasizing battery removal.
Advice on storing tools and batteries in cool, dry places, away from heat and sunlight.
Table listing common faults, their possible causes, and recommended actions.
Information on recycling tool materials and proper disposal of batteries.
Guidance on contacting Hilti representatives for warranty condition inquiries.
To Next Page
