Hilti SID 2-A - Battery charge state display; Items supplied with the product; Technical Data and Specifications; Technical specifications

8 English
▶ Use only Hilti battery chargers of the C4/12 series for charging these
batteries.
3.3 Charge state display
The charge state of the Liion battery is displayed after pressing one of the
release buttons lightly (press only until slight resistance is felt).
Status Meaning
4 LEDs light. • Charge state: 75 % to 100 %
3 LEDs light. • Charge state: 50 % to 75 %
2 LEDs light. • Charge state: 25 % to 50 %
1 LED lights. • Charge state: 10 % to 25 %
1 LED blinks. • Charge state: < 10 %
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
3.4 Items supplied
Impact screwdriver/wrench, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by us for use with the product can be found at your local Hilti
Center or online at: www.hilti.com
4 Technical data
4.1 Technical data
SID 2A
Rated voltage
10.8 V
Weight in accordance with EPTA procedure 01/2003
1.1 kg
(2.4 lb)
Rated speed under no load
0 /min …
2,500 /min
4.2 Battery
Battery operating voltage
10.8 V
Ambient temperature
−10 ℃ … 60 ℃
(14 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Printed: 26.09.2018 | Doc-Nr: PUB / 5245418 / 000 / 02