Why my Hilti SIW 22-A doesn't run?
If your Hilti Power Screwdriver doesn't run, it might be due to the battery not being fully inserted. Ensure the battery is pushed in until you hear a distinct double click. Another possible cause is a low battery. Try changing the battery and charging the empty one.
What to do if running speed suddenly drops considerably on Hilti Power Screwdriver?
If the running speed of your Hilti Power Screwdriver suddenly drops considerably, the battery may be low. Try changing the battery and charging the depleted one.
Why Hilti SIW 22-A Power Screwdriver or the battery becomes very warm?
If your Hilti Power Screwdriver or its battery becomes very warm, immediately switch off the power tool, remove the battery, keep it under observation, and allow it to cool down. This could be due to an electrical fault or because the tool is overloaded, exceeding its application limits. Consider selecting a more suitable power tool for the task.
How to unlock the control switch on Hilti Power Screwdriver?
If the control switch of your Hilti Power Screwdriver can’t be pressed because it's locked, the forward/reverse selector switch is likely in the middle position. Push the forward/reverse switch to the left or right to unlock it.
Why does the battery run down quickly on Hilti SIW 22-A?
If the battery on your Hilti Power Screwdriver runs down more quickly than usual, it could be due to very low ambient temperature. Allow the battery to warm up slowly to room temperature.
What to do if the battery doesn’t engage with an audible double click on Hilti SIW 22-A Power Screwdriver?
If the battery of your Hilti Power Screwdriver doesn’t engage with an audible double click, the retaining lugs on the battery might be dirty. Clean the retaining lugs and push the battery in until it engages. If the problem persists, contact Hilti Service.
General| Brand | Hilti |
|---|---|
| Model | SIW 22-A |
| Category | Power Screwdriver |
| Language | English |
Details on how to use the documentation for safe operation.
Explains signal words and symbols used in the document and on the product.
General details about the product, including type designation and serial number.
Lists symbols found on the product itself, explaining their meaning.
Essential safety advice for all power tools, covering work area, electrical, and personal safety.
Guidelines for using and maintaining the power tool correctly and safely.
Procedures for using and maintaining Li-ion batteries safely.
Specific safety precautions for screwdrivers and impact wrenches.
Extra safety measures applicable to screwdriver models.
Identifies key components and features of the product.
Specifies the product's authorized applications and limitations.
Explains how to interpret the battery charge indicators.
Lists the contents included with the product package.
Technical specifications for 14 V batteries.
Technical specifications for 22 V batteries.
Safety steps before starting work and inserting the battery.
Step-by-step instructions for charging the Li-ion battery correctly.
Procedures for safely inserting and removing the battery from the tool.
Instructions for attaching the optional belt hook.
Guide for correctly installing accessory tools into the chuck.
How to select the desired torque setting using the torque selector switch.
Adjusting the tool's rotation direction and safety lock.
How to activate the tool and control rotation speed.
Specific guidance for using the tool for screwdriving applications.
Procedure for safely turning off the power tool.
Steps for safely removing accessory tools from the chuck.
Guidelines for cleaning and maintaining the power tool.
Procedures for cleaning and maintaining Li-ion batteries.
Regular checks and repair procedures for the product.
Safety precautions and procedures for transporting the tool and batteries.
Guidelines for storing the tool and batteries safely and properly.
Common issues, their possible causes, and recommended actions.
Information and regulations for proper disposal of the tool and batteries.
Information regarding the product's warranty coverage.
To Next Page
