Hilti SIW 22-A - Battery Specifications; Battery, 14 V; Battery, 22 V

*2153700*
2153700 English 11
SIW 22A
1/2″ square drive
with ball-notch
retention
3/8″ square drive
with locking ring
Torque Setting I
66 ftlb
f
(90 Nm)
55 ftlb
f
(75 Nm)
Setting II
100 ftlb
f
(135 Nm)
89 ftlb
f
(120 Nm)
Setting III
148 ftlb
f
(200 Nm)
129 ftlb
f
(175 Nm)
4.2 Battery, 14 V
Battery operating voltage
14.4 V
Ambient temperature
14 ℉ … 140 ℉
(−10 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
4.3 Battery, 22 V
Battery operating voltage
21.6 V
Ambient temperature
14 ℉ … 140 ℉
(−10 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.