Hilti SID 2-A - Operating the Impact Screwdriver; Inserting the battery; Switching on the tool; Switching off the tool

English 9
5 Operation
5.1 Inserting the battery
WARNING
Risk of injury! Inadvertent starting of the impact screwdriver.
▶ Before fitting the battery, check that the cordless impact screwdriver is
switched off and that the forward/reverse switch is in the middle position
(i.e. safety lock engaged).
WARNING
Electrical hazards! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the impact screwdriver are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check
that the battery is securely seated in the power tool.
▶ Fit the battery and make sure that it is heard to engage.
5.2 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is
pressed in.
5.3 Switching off
▶ Release the control switch.
Printed: 26.09.2018 | Doc-Nr: PUB / 5245418 / 000 / 02