Bike Assembly Guide
◆ Preparation Checklist
*Follow our Youtube channel Himiway Bikes to watch bike assembly tutorials！
TransformerPower cableHex Wrench
Bolts
Guide & Manual
NOTICE:
1. Please keep the original packaging for at least 15 days!
2. Before assembling your bike, it’s recommended to remove the battery for the
reasons outlined below:
• Determine if there’s battery drain or damage during shipping.
• Reduce the weight of the ebike to make it easier to maneuver the bike while
assembling.
• Avoid battery damage during the assembly process.
Go to page 16 to learn about removing and charging the battery.
Assembly Instructions
Step 3:
Tighten bolts to handlebar stem, but don’t tighten completely as you may want
to further adjust the angle later to align more precisely. Test the positioning, and
adjust the handlebar to your preferred angle. After determining the best position,
completely tighten all the bolts on the stem.
NOTICE: In addition to angle, the height of the handlebar can be adjusted by
adding or removing the headset spacers if needed. For those without experience,
we recommend having a professional make such adjustments for safety reasons.
◆ Handlebar Installation (Hex Wrench)
Step 1:
Step 2:
Loosen the bolts on your bike stem.
Center your handlebars and rotate them to align to the marking pointed to in the
below image.
5
To Next Page
Loading...
