Tail light use and maintenance Change battery
Tail light
The tail light is designed as an independent switch, and the
switch can be pressed when in use.
◼ Prepare a suitable cross screwdriver, 2 AAA batteries.
◼ Remove the tail light, unscrew the front panel screws,
open the rear casing and replace the battery.
◼ Fasten the rear casing, tighten the screws, install on the
fixing plate, finish battery changing.
cross screwdriver
AAA battery
Check battery level
◼
Press the battery button, if the light is blue, the power is
about 70%-100%.
◼
Press the battery button, if the light is green, the power is
about 40%-70%.
◼
Press the battery button, if the light is red, the power is
about 10%-40%.
◼ If the light is flashing, please charge in time.
To Next Page
Loading...
