Instructions for Battery Use
Battery Removal and Installation
After turning the key, the battery will bounce and the battery can be removed.
Firstly, place one end of the battery in the
battery tank in the direction of the bicycle head.
The other end of the battery is aligned with
the charging port, press it gently and lock it.
Turn the key back to its original position and the battery is installed.
Battery Charging
Open the soft cover on one side of the battery
Insert the charging plug into the
charging port of the battery, and then
connect the power plug of the other end
to the power supply.
When charging, the state light of charger is in red
When the battery is fully charged, the
status light of the charger is in green
and charging is complete.
After unplugging the charger, keep it properly and cover it with a soft cover.
If the battery is charged in the bike, please turn off the power of the instrument.
To Next Page
Loading...
