HIMO C20 - Speed transmission instructions; Speed transmission diagram and gear guide; Drive system usage precautions

8
Speed
transmission
instructions
A diagram of the speed
transmission
Gears
Power
Speed
1-2
Relaxed
Slow
3-4
Moderate
Moderate
5-6
Hard
Fast
To speed up, start at a lower gear and shift to a higher gear as the speed increases.
Above are the suggestions for riding, and the gear can be used reasonably according to
personal habits.
When using the drive system, we should pay attention to the following details.
When using the speed transmission system, try not to skip gears, because jump gears can easily damage the speed transmission. That is ,
it is absolutely impossible to change more than two gears at a time and it should be adjusted at one level to another level to better
protect the speed transmission system.
When the bicycles stops running, or when it is going downhill, do not let the transmission system reversed, which is not only bad for the
transmission system, but also may cause accidents.
Gear pointer
Gear down
Gear up
When going uphill, the speed will decrease, and gear will be lowered to maintain a
certain pedal strength.
Speed up in the downwind and gear up to maintain a certain pedal strength.