12
3. Performing a wireless fitting can sometimes be challenged
due to number of factors related to equipment setup, and the
physical layout of the fitting environment.
• Place Noahlink Wireless on the table with a clear line-of-
sight to the hearing instruments, which should be within a
range of 10 feet (3 metres).
• Avoid placing the Noahlink Wireless in a USB hub with
other USB devices (e.g. Bluetooth dongle), as this can de-
crease the efficiency of the Noahlink Wireless.
• When fitting hearing instruments inside a sound booth
place the Noahlink Wireless inside or close to the booth.
• It is recommended not to use USB cables between the
Noahlink Wireless and the PC exceeding a length of 10 feet
(3 metres).
4. You are now ready to start fitting wireless hearing instruments.
To Next Page
Loading...