18
Light indicators (LED)
The Light indicators at the top of the Noahlink Wireless serve as
a multipurpose user interface, providing connectivity status and
activity of the programming interface.
*Test Mode - Running the test mode the system checks if it can see the
Noahlink Wireless by asking for the version number.
LED Blinks Meaning
Start Up.
Noahlink Wireless attached to PC USB port
Fitting software launched and connected to
Noahlink Wireless
Hearing instrument(s) connected to Noahlink Wireless
Data being transferred between instruments and fitting software
Hearing instruments disconnected
Running
Noahlink Wireless Test Mode*
To Next Page
Loading...