Hinterberg Design Machine quilting frame - Frame Component Hardware List; Required Assembly Tools

4
Carriage Handle Hardware
DESCRIPTION PART# QTY.
Knobs with Short 5/8” studs 3112 2
Knob with Long 1 1/8” stud 3113 1
Machine Screws 1/4” x 3/4” 3057 3
Plastic Washer 3037 1
Carriage Handle Parts
U - Shaped Handle 2041 1
T - Shaped Handle 2042 1
I - Shaped Handle 2043 1
L - Shaped Handle 2044 1
End Frame Hardware
DESCRIPTION PART# QTY.
Height Adjuster Assemblies 4
1/4” x 1-1/4” Hex Head Screws 3056 8
1/4” Metal Washers 3021 11
1/4” x 1-1/2” Hex Head Screws 3047 3
Small Plastic Washers 3037 3
Large Black Star Knobs 3076 14
3/8” x 2” Carriage Bolts 3054 4
Phillips Head Wood Screws 1 1/4” 3028 12
Lock Pins 3105 4
Teflon Tape 9029 8
MACHINE FRAME HARDWARE
Center Support Hardware
DESCRIPTION PART# QTY.
J-Hook 3045 4
Allen Head Bolt 3041 4
3/8”x2” Carriage Bolt 3054 1
3/8” Metal Washer 3022 1
1/4” Metal Washer 3021 4
1/4” Wing Nut 3032 4
3/8” Wing Nut 3018 1
Barrel Nut 3031 4
Allen Wrench 3043 1
Pointer Package Hardware — Included, see page 19
Leg Brace Hardware
DESCRIPTION PART# QTY.
Black Star Knob with Stud 3106 4
3/8” Hex Nut 3029 4
J-Hook 3045 8
1/4” Metal Washer 3021 8
1/4” Wing Nut 3032 8
Roller End Hardware
DESCRIPTION PART# QTY.
Barrel Nuts 3031 3
1/4” Metal Washers 3021 3
1/4” x 1 1/2” Hex Head Bolts 3053 3
Hex Head Wrench 3049 1
Metal Roller Inserts w/ 3” bolts 3111 10
Tools Required
Phillipshead screwdriver
Hammer