Measurement Procedure
16
Before measuring, be sure to read the "Usage Notes" in the Instruction Manual.
Measurement Procedure
Install the battery pack (option)
Rear
View
We recommend using the battery pack to provide backup during power outag-
es, and to preserve measurement data.
Connect the power cord
Top View
Connect the measurement cable
Top View
CH1CH10
Pulse Input Connector
Analog Input
Terminals
For pulse input signals:
connect the Hioki 9641 Connection
Cable .
For voltage or temper-
ature measurement:
connect appropriate
measurement or ther-
mocouples leads.
Insert a CF Card or USB flash drive (option)
Top View
Confirm that sufficient free space
is available, and for auto-saving,
that a CF card or USB flash drive
is inserted before measuring.
To Next Page
Loading...
