2
Press these keys to
move the cursor on the
displayed waveform.
1
The values at the
cursors are displayed.
To view only the cursor values for speci-
fied channels, Select [Ch set] from the
[AB Crsr] settings, and select the chan-
nels for which to display cursor values.
To select which cursor(s) to move, select
from the [Move] setting items.
•A Cur
•B Cur
•AB Cur
(Move both cursors
at the same time)
To change the cursor
type, select from the
[Type] setting items.
•Trace
(time value and measure-
ment value)
• Vert (Vertical, time value)
•Horz
(Horizontal, measure-
ment value)