4
Installation EAGLE20/30
Release
06
04/2014
2.4 Installing an SFP transceiver (optional) 30
2.5 Connecting the terminal blocks 31
2.5.1 Working voltage with the characteristic value K 31
2.5.2 Working voltage with the characteristic value C 32
2.5.3 Signal contact 33
2.6 Operating the device 34
2.7 Connecting data cables 34
2.7.1 10/100 Mbit/s twisted pair port 34
2.7.2 100/1000 Mbit/s twisted pair port (optional) 34
2.7.3 100/1000 Mbit/s F/O port 35
2.8 Insert data in label area 35
3 Basic set-up 36
4 Maintenance and service 37
5Disassembly 38
5.1 Removing the device 38
5.2 Removing an SFP transceiver (optional) 39
6 Technical data 40
A Further Support 55
To Next Page
Loading...
