Need help?Do you have a question about the Hirschmann RSB20 and is the answer not in the manual?
General| Model | RSB20 |
|---|---|
| Protection Class | IP30 |
| Mounting | DIN Rail |
| Power Supply | 24 V DC |
| Switching Technology | Store-and-forward |
| Management | SNMP |
| Redundancy | RSTP |
| Weight | 0.5 kg |
Information on device status, alarm states, system parameters, and device view with port status symbols.
Configure IP parameters, define IP source, and set up HiDiscovery access for device IP address assignment.
Display software versions and perform software updates via TFTP or HTTP file selection.
Configure each port's operation mode, link state, bit rate, and duplex mode.
Configure Power over Ethernet (PoE+) settings and monitor power status for PoE-capable ports.
Change read and read/write passwords for Web, CLI, and SNMPv3 access; passwords are case-sensitive.
Configure access via SNMPv1 or SNMPv2, including IP address restrictions and access modes.
Allows switching off the Web server to prevent Web access to the device; can be reactivated via CLI.
Synchronize system time using Simple Network Time Protocol (SNTP) client and server functions.
Configure Precision Time Protocol for precise time management in time-critical applications via LAN.
Configure global switching parameters such as MAC address table size and aging time.
Display and edit filters specifying how data packets are sent based on MAC addresses.
Configure IGMP Snooping globally and per port for multicast traffic management.
Configure global QoS settings, including IP-DSCP for management packets and trust modes (untrusted, trustDot1p, trustIpDscp).
Assign a port priority (0-7) to ports and map them to traffic classes based on IEEE 802.1D.
Configure and monitor redundancy functions like HIPER-Ring and MRP for high-availability ring-shaped networks.
Configure and manage the Rapid Spanning Tree Protocol for loop-free networks and fast reconfiguration.
Lists logged events with timestamps and allows updating or deleting the event log content.
View port statistics, utilization data, and SFP module connections and properties.
Review data traffic at ports for diagnostic purposes by mirroring it to another port.
Provides an overview of the device's overall condition, displaying status as 'Error' or 'OK'.
Configure signal contacts for controlling external devices or monitoring device functions and reporting status.
Configure the DHCP relay agent to manage IP address assignments, including Option 82 fields.
Access the Command Line Interface (CLI) using the Web interface for advanced device management.
Contact information for technical support, Hirschmann dealers, and online support resources.
Information about training courses, product briefings, and support services offered by the Competence Center.
To Next Page