Installation EAGLE20/30
Release
06
04/2014
41
Climatic
conditions
during operation
Ambient air temperature
a
. Devices with operating temperature
characteristic value S (standard):
0 °C ... +60 °C (+32 °F ... +140 °F)
Devices with operating temperature
characteristic value E and T (extended):
−40 °C ... +70 °C
b,c
Humidity 10 % ... 95 %
(non-condensing)
Air pressure minimum 700 hPa (+9842 ft; +3000 m)
maximum 1060 hPa (−1312 ft; −400 m)
Climatic
conditions
during storage
Ambient air temperature
d
. −40 °F ... +185 °F (−40 °C ... +85 °C)
Humidity 10 % ... 95 %
(non-condensing)
Air pressure minimum 700 hPa (+9842 ft; +3000 m)
maximum 1060 hPa (−1312 ft; −400 m)
“FAULT”
signal contact
Switching current max. 1 A, SELV
Switching voltage max. 60 V DC or max. 30 V AC, SELV
Pollution degree 2
Protection
classes
Laser protection Class 1 in compliance with IEC 60825-1
Degree of protection IP 30
a. Temperature of the ambient air at a distance of 2 inches (5 cm) from the device
b. Only use the SFP transceiver with the extension “EEC”.
c. +85 °C for 16 hours (tested in accordance with IEC 60068-2-2)
d. Temperature of the ambient air at a distance of 2 inches (5 cm) from the device
To Next Page
Loading...
