Hirschmann RS2-FX-LH/FX-LH - Page 10

Displays
Equipment status 1 x green LED P1 – power 1, supply voltage 1 present
1 x green LED P2 – power 2, supply voltage 2 present
1 x red LED FAULT – indicator contact is open and indicates error
1 x green LED Stand by – standby function
1 x green/yellow LED RM – redundancy manager
Port status 7 x green/yellow LED 1to7– data, link status
Controls
2-pole DIP switch RM – activate redundancy manager functionality
Stand by – activate standby function
Scope of delivery
Rail Switch RS2-…/… incl. terminal block for supply voltage, description and operating instructions
manual RS2-…/… on CD-ROM
Order number
Rail Switch RS2-FX/FX 943 653-500
Rail Switch RS2-FX/FX NAVY 943 653-502
Rail Switch RS2-FX/FX ST 943 716-500
Rail Switch RS2-FX-SM/FX-SM 943 655-500
Rail Switch RS2-TX/TX 943 654-500
Rail Switch RS2-FX-SM/FX-LH 943 747-500
Rail Switch RS2-FX-LH/FX-LH 943 748-500
Accessories
ETHERNET manual 943 320-011
Manual
Basics Industrial ETHERNET and TCP/IP 280 720-834
Terminal access cable 943 301-001
Rail Power Supply RPS 30 943 662-003
Rail Power Supply RPS 60 943 662-001
Rail Power Supply RPS 120 943 662-011
AutoConfiguration Adapter ACA 11 943 751-001
Network Management Software HiVision 943 471-100
Hirschmann Automation and Control GmbH
Stuttgarter Straße 45-51
D-72654 Neckartenzlingen
Germany
Tel.: ++49 / 1805 / 14-1538
Fax: ++49 / 7127 / 14-1551
E-Mail: ans-support@hirschmann.de
Internet: http://www.hirschmann.com
Printed in Germany
Subject to alterations
039656111020505000