Hirth F 33 A/B - 2 Operation of the engine 1-3; 3 Maintenance 1-7

GH F33 BDA
2 Operation of the engine
1-3
2.1 Generally 1-3
2.2 Run in recommendation 1-3
2.3 First inspection 2-3
2.4 Start procedure 2-3
2.5 Operation conditions 3-3
2.6 Cut off of the engine 3-3
3 Maintenance 1-7
3.1 Generally 1-7
3.1.1 Index 1-7
3.1.2 Tools, special tools and torques 1-7
3.2 Maintenance intervals 1-7
3.2.1 Daily inspections 1-7
3.2.2 Inspection intervals 2-7
3.3 Component change 2-7
3.4 Maintenance instructions 3-7
3.4.1 Variable jet and diaphragm carburettor 3-7
3.4.1.1 Maintenance of the variable jet carburettor 3-7
3.4.1.1-1 Basic adjustment of fuel mixture screw 3-7
3.4.1.2 Maintenance of the diaphragm carburettor 3-7
3.4.2 Air filter 4-7
3.4.2.1 Installation and de-installation of the air filter 4-7
2.4.2.1 Air filter cleaning 4-7
3.4.3 Fuel line and pulse line 4-7
3.4.3.1 Fuel line check 4-7
3.4.3.2 Pulse line check 4-7
3.4.4 Spark plugs and plug sockets 4-7
3.4.4.1 Condition check of the plug socket 4-7
3.4.4.2 Installation and de-installation of the spark plug 4-7
3.4.4.3 Condition of the spark plug 5-7
3.4.5 Cylinder head 5-7
3.4.5.1 Installation and de-installation of the cylinder head 5-7
Stand: 02.02.05 DOC_F33_B_E_0.01