2
TV Front and Rear
Power button(Standby/Source)
Power indicator
Power cord
Item Description
Power indicator The light is red in standby mode.
Power button
(Standby/Source)
Press the button to turn the TV on. Press it again
to bring up the control menu and move the focus
between different inputs. Long press the button to
make a selection.
ANT 1
DVB-T/T2/C
ANT 2
DVB-S/S2
13/18V 420mA
LAN
HDMI 2(eARC) HDMI 1
COMMON INTERFACE (CARD FACE FRONT)
AV IN
HEADPHONE
DIGITAL
AUDIO OUT
DC 5V 0.5A(MAX) x 2
USB x 2
NOTE
ANT2 Jack supports power supply for satellite antenna (13/18V, 420mA
max.)
Check the jacks for position and type before making any connections.
Loose connections can result in image or colour problems. Make sure
that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to
the user’s manual of your A/V device for compatibility and connections
procedure.
Before connecting external equipment, remove the mains plug from the
wall socket. Otherwise, it may cause electric shock.
Powering on the TV requires several seconds to load programmes. Do not
rapidly turn the TV off as it may cause the TV work abnormally.
The Picture is Only for Reference.
32"
32"
40"
40"
ANT 1
DVB-T/T2/C
ANT 2
DVB-S/S2
13/18V 420mA
LAN
HDMI 2 HDMI 1(eARC)
COMMON INTERFACE (CARD FACE FRONT)
AV IN
HEADPHONE
DIGITAL
AUDIO OUT
DC 5V 0.5A(MAX) x 2
USB x 2
To Next Page
Loading...
