Hisense 75U88KM User Manual

2
Getting started
Step 1. Attach stand or mount
Before you start using your TV, attach your TV stand or mount it on the wall.
CAUTION:
• DisconnecttheACpowercordbeforeinstallingastandorawallmountbracket.
• TheLEDdisplayonyourTVisfragile.MakesuretheTVscreenisnotscratchedor
damaged by hard objects or from pressure.
• Aftertheinstallationiscomplete,makesuretheTVissteadyonatableorfirmly
attached to a wall mount, before removing all protective film, if any.
Attach the TV stand
To attach the TV stand legs to your TV:
1.CarefullyplaceyourTVfacedownonaclean,softandatsurface.
2. Insert the TV base stands into the bottom slots on your TV.
3.
Use the screws provided to secure each base stand tightly.
55" (139.7cm)
Base Stand
Note:
If your table is long enough to place the TV, then insert the base stands into the
screw holes ‘A’ that are shown in the illustration. If your table is not long enough, then
insert the base stand into the screw holes ‘B’ that are shown in the illustration. Note
that these two installation methods types cannot be mixed.
Screws:
M5×12
A
Base Stand
Screws:
M5×12
Base Stand
Screws:
M5×12
B
B
A
65" (165.1cm) / 75" (190.5cm)
Base Stand
Screws:
M5×12
Base Stand
Base Stand
Screws:
M5×12
Screws:
M5×12

Hisense 75U88KM Specifications

General

Brand	Hisense
Model	75U88KM
Category	LED TV
Language	English