Hisense AMW4-36U4SAC - User Manual

MULTI-SPLIT TYPE AIR CONDITONER
SERVICEMANUAL V:7.1 
●INDOOR UNIT:
AMS-07UR4SN （ VG/VT/VL/VQ/UP/UL/UQ/NS/ZC/ZA/NT/NK/NM/VM ） 4
AMS-09UR4SN （ VG/VT/VL/VQ/UP/UL/UQ/NS/ZC/ZA/NT/NK/NM/VM ） 4
AMS-12UR4SN （ VG/VT/VL/VQ/UP/UL/UQ/NS/ZC/ZA/NT/NK/NM/VM ） 4
AMS-07/09/12UR4SG （ NK/NM/VT/VQ ） 4
AMS-09/12UR4SPSC4
AMS-18U4SV(VG/VQ/VL/VT/UP/UL/UQ/NT/NK/NM
） 4
AMD-09UX4SJD
AMD-12UX4SJD
AMD-18UX4SJD
AMC-12UX4SAA
AMC-18UX4SAA
●OUTDOOR UNIT:
Hisense Corporation
AMW2-16U4SGC1
AMW2-16U4SGD1
AMW2-20U4SNC1
AMW2-20U4SZD1
AMW3-20U4SZD1
AMW3-24U4SAD1
AMW4-28U4SAD1
AMW
4
-
36U4SAD1
AMW3-20U4SZD
AMW3-24U4SZD
AMW3-24U4SKC
AMW4-28U4SKC
AMW4-36U4SAC
AMV-12UR4SA
AMV-18UR4SA
AS-09/12UR4SVETD5(TG5/TC5/TE5/TF5)
AS-18UR4SFATD5(TD5/TG5/TC5)

Summary

OPERATING RANGE

REFRIGERANT FLOW DIAGRAM

4-1. Refrigerant flow diagram

4-2. Evacuation procedures

Step-by-step guide for refrigerant evacuation.

CONTROL MODE

6-1 Indoor control mode

TROUBLE SHOOTING

7-1- Error code

Fault code display methods for indoor and outdoor units.

Outdoor Unit Fault Indications

Error sequences indicated by outdoor control board LEDs for various failures.

Outdoor Fault Code Table

Table of outdoor fault codes, descriptions, and remarks.

Indoor Fault Code Table

Table of indoor fault codes, descriptions, and remarks.

CHECKING COMPONENTS

8-1. Check refrigerant system

Procedure for checking the refrigerant system flow and conditions.

8-2. Component Checks

Hisense AMW4-36U4SAC Specifications

General

Refrigerant Type	R410A
Voltage	220-240V
Phase	1
Compressor Type	Rotary
Frequency	50 Hz
Cooling Capacity	36000 BTU/h
Heating Capacity	36000 BTU/h