4.Operation and functions
4.5.2.3 Ice maker error
Eb error:
1.Check the connecting wiring between mainboard and ice maker
(corresponding pin No.7~10 on CN4 connector of mainboard,as the
drawing below) and repair if it is broken.
2.Input 12V power to pin No.7 and No.8 on CN4 connector of
mainboard,check the ice maker can positive rotating(Red wiring
connect power,white wiring connect GND) and negative rotating
(white wiring connect power,red wiring connect GND) normally or not.
If it is abnormal,change the ice maker or mainboard.
23
To Next Page