45
6.4.3 Removing the fan motor
6.Circuit and checking
1.Unplug the appliance
2.Remove the screws of freezer wind channel component by
screwdriver,as picture 1.
3.Remove the wind channel component and unplug the terminals,as
picture 2.
4.Remove the screw of the wind channel component by screwdriver,
as picture 3.
5.Pry up the wind channel cover from the buckles by screwdriver,as
picture 4.
6.Separate the front cover and back cover,as picture 5.
7.Remove the screws of fan motor and then remove the fan motor,
as picture 6.
To Next Page
Loading...
