Hisense D12CW - Installation Location; Location Requirements

8
3. INSTALLATION
3.1 LOCATION
1. Place the unit on a firm, level surface in an area with at least 20cm of free space around
it to allow for proper air circulation.
2. Never install the unit where it could be subject to：
 Heat sources such as radiators, heat registers, stoves or other products that
produce heat.
 Oil or water being splashed on it
 Direct sunlight
 Mechanical vibration or shock
 Excessive dust
 Lack of ventilation, such as by cabinets or bookcases
 Uneven surfaces
WARNING!
Install the unit in rooms which exceed 4 m².
Do not install the unit in a place where inflammable gas may leak.
NOTE!
The manufacturer may provide other suitable examples or may
offer additional information about the refrigerant odour.