EasyManua.ls Logo

Hisense H415BITF-WD - Installing Your New Appliance

Hisense H415BITF-WD
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:
Leveling of appliance
This appliance performs well within
the climate class from SN to ST
showed in the table below.It may not
w ork properly if being left at a
temperature above or below the
i ndicated range for a long period.
Stand your appliance in a dry place to
a void high moisture .
Keep the appliance ou t of direct
sunlight, rain or frost. Stand the
a ppliance away from heat sources such
a s stoves,fires or heaters.
For suff icient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
n eed to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner.
Toa llow the doors to se lf-close, tilt the
top backwards by about 10mm .
9
Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiencyof
th e cooling system andsa ve
en ergy,it isnecessary to
ma intain good ventilation around the
a ppliance for the di ssipation of heat. For
th is reason,sufficient clearsp ace should
be availablearound the refrigerator.
It is advisable for t here to be
5 0-70mm of space fro m the back to the
w all,at least 100mm from its top,at le ast
1 00mm from its side to the wall and a
clear space upfront to allow the doors t o
o pen 115°.As shown in fo llow
d iagrams.
Suggest:
Climate class
SN
N
ST
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
831
717
115

Related product manuals