Wireless Receiver Kit
ＨＹＲＥ－Ｔ０１Ｈ
2. Installation of Wireless Receiver Kit
6
NOTE:
Install the receiver kit onto the air panel.
)
1 Install the wireless receiver kit,the indoor unit and the air panel at the same time.
)
2 Check to ensure that the distance between the wireless receiver kit and the EMI Source is larger
than 3m.
)
3 In case that the wireless receiver kit is installed after installing the indoor unit ,turn off the power
source of the indoor unit and remove the air panel.
)
4 This receiver kit can be installed at the position of
ＨＹＲＥ－Ｔ０２Ｈ
To Next Page
Loading...
