4
Do not use cut or modied SIM or MicroSD cards with
your device as these may not be recognized and could
damage the card tray.
Turning your device on/off
Turning on the phone
Press and hold the power button until the screen turns on.
When you turn on your device for the rst time or after perform-
ing data reset, follow the onscreen instructions to set up your
device.
Turning off the phone
To power off your phone, press and hold the power button, and
then touch
.
Charging the battery
Charge the battery before using it for the rst time or when it
has been unused for extended periods of time.
1
Connect the USB cable to the USB power adaptor, and
then plug the end of the USB cable into the USB port.
2
Plug the USB power adaptor into an electric socket.
3
After the battery is fully charged, disconnect the device
from the charger. First unplug the charger from the device,
and then unplug it from the electric socket.