Hisense HS205 - Connections; Connect to HDMI (ARC) Socket

10
Connections
Connect to HDMI (ARC) Socket
Your Soundbar supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your Soundbar by using a single HDMI cable.
1 Using a High Speed HDMI cable (not
included), connect the HDMI ARC -To TV
connector on your Soundbar to the HDMI
ARC connector on the TV.
- The HDMI ARC connector on the TV might
be labeled dierently. For details, see the
TV user manual.
2 On your TV, turn on HDMI-CEC operations.
For details, see the TV user manual.
Tips:
- Your TV must support the HDMI-CEC and
ARC function. HDMI-CEC and ARC must be
set to On.
- The setting method of HDMI-CEC and
ARC may differ depending on the TV. For
details about ARC function, please refer to
your TV owner’s manual.
- Only HDMI 1.4 compatible cables can
support the ARC function.
Connect to OPTICAL Socket
- Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable
(included) to the TV’s OPTICAL OUT socket
and the OPTICAL socket on the unit.
Connect to COAXIAL Socket
• You also can use the COAXIAL cable (not
included) to connect the TV's COAXIAL
OUT socket and COAXIAL socket on the
unit.
Tip:
• While in OPTICAL or HDMI ARC or
COAXIAL mode, if there’s no sound output
from the unit, you may need to activate
PCM Signal output on your source device
(eg. TV, DVD or Blu-ray player).

56:/)'2

.*3/'8)
.*3/'8)
.KGJVNUTK
)5'>/'2
2/4+/4
)5'>/'2
BA