What does F54 error mean on my Hisense Dishwasher?
If your Hisense Dishwasher shows the F54 error, it means it is overfilling with water. Turn off the water tap. To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
Why is the control panel on my Hisense HS693C60XADUK Dishwasher not responding?
If the Hisense Dishwasher's control panel isn't responding, wait a moment and try again, as you might have pressed it too soon after closing the door. Ensure the door is fully closed. Clean the control panel with a dry or slightly damp cloth to remove any dirt. Also, check if the Child lock or Automatic child lock is activated.
What to do if my Hisense Dishwasher shows F12 error?
If your Hisense Dishwasher displays error code F12, ensure that the water tap is turned on. Also, check the outer filter on the inlet hose for any blockages. Refer to the 'Unblocking the inlet hose filter' section in the Care and cleaning chapter for instructions.
How to fix F52 error on Hisense HS693C60XADUK?
If your Hisense Dishwasher displays error code F52, clean the coarse and fine filters. Inspect the outer filter on the inlet hose for blockages. Make sure the drainage hose is correctly installed according to the installation instructions.
How to fix F10 error on Hisense Dishwasher?
If the Hisense Dishwasher is showing an F10 error, it indicates overfilling water. Try unblocking the drainage pump. See the chapter Care and cleaning.
What does F40 error mean in Hisense Dishwasher?
If your Hisense Dishwasher displays error code F40, this indicates an inlet valve leakage. Turn off the water tap.
What to do for F41 error on Hisense HS693C60XADUK?
If your Hisense Dishwasher is showing error code F41, there is a heater fault. Turn off the water tap and remove the plug from the wall socket.
Why does the control panel on my Hisense Dishwasher not react when pressed?
If the control panel of your Hisense Dishwasher isn't responding, it might be because you pressed it too soon after closing the door. Wait a moment and try again. Also, the control panel only works when the door is closed. Finally, check if the Child lock or Automatic child lock is activated, and if so, refer to the Safety instructions chapter to deactivate it.
What to do if my Hisense HS693C60XADUK is overfilling with water?
If your Hisense Dishwasher is overfilling with water, unblocking the drainage pump might solve the issue. Refer to the Care and cleaning chapter for instructions. If the problem continues, it is recommended to turn off the water tap and contact your nearest service center for assistance. To prevent water from leaking, do not unplug the dishwasher until the water tap is turned off.
How to fix a water inlet fault on my Hisense Dishwasher?
If your Hisense Dishwasher displays a water inlet fault, first ensure that the water tap is turned on. Then, check the outer filter on the inlet hose for any blockages. You can find instructions on how to unblock the inlet hose filter in the Care and cleaning chapter. If the issue persists, it is recommended to contact your nearest service center for further assistance.
General| Brand | Hisense |
|---|---|
| Model | HS693C60XADUK |
| Category | Dishwasher |
| Language | English |
To Next Page