How to remove Spots left after washing in Hisense HS6130?
If you notice spots left after washing in your Hisense Dishwasher, especially from lipstick or tea, use a detergent with a bleaching agent.
What to do if Hisense HS6130 Dishwasher shows F40 error?
If your Hisense Dishwasher displays the F40 error, which indicates an inlet valve leakage, turn off the water tap.
What does F52 error mean on Hisense Dishwasher?
To resolve the F52 error (water level fault) on your Hisense Dishwasher, clean the coarse and fine filters. Also, check that the outer filter on the inlet hose is not blocked and ensure the drainage hose is correctly fitted according to the installation instructions.
What does F10 error mean on Hisense HS6130 and how to fix it?
The F10 error code on your Hisense Dishwasher indicates overfilling. Clear the drainage pump.
What to do if Hisense HS6130 shows F12 error?
To address the F12 error on your Hisense Dishwasher, first check that the water tap is turned on. Then, inspect the outer filter on the inlet hose to ensure it's not blocked.
Why does my Hisense HS6130 Dishwasher make a rattling sound?
A rattling sound during dishwashing in your Hisense Dishwasher typically means the dishes are not placed securely or the spray arms are obstructed. Check that the dishes are placed securely and manually spin the spray arms to ensure they can rotate freely.
What to do if Hisense HS6130 Dishwasher cannot close door?
If the door of your Hisense Dishwasher won't close, ensure the baskets are correctly positioned horizontally and that dishes aren't blocking them. If the door lock isn't clicking into place, open the door, press and hold the Auto open option button for 15 seconds, wait 30 seconds, and then close the door again to see if the lock engages.
How to avoid bad odor in Hisense Dishwasher?
A bad odor in your Hisense Dishwasher can be caused by dirt around the seals and in corners. Clean these areas with a washing-up brush and a low-foaming cleaner. Prolonged use of low-temperature programs can also contribute to the odor; run a program with a higher temperature about once a month.
What to do if Hisense HS6130 Dishwasher shows 1 minute on display?
If your Hisense Dishwasher displays '1 minute', it means the program is taking longer than estimated. This can be due to blocked filters, incorrectly fitted filters, debris in the drainage pump, a missing drainage pump stop, or a kink in the drainage hose. Clean the filters, check their placement, inspect the drainage pump, and ensure the hose is free of kinks.
Why is my Hisense HS6130 not starting?
Your Hisense Dishwasher might not start because the door isn't properly closed, you opened the dishwasher mid-cycle, the door lock isn't engaged, a fuse/circuit breaker tripped, the plug isn't in the socket, the water tap is off, there are overflows/leaks, there's a whirring sound that doesn't stop when the power is off (drainage pump issue), or the delayed start option is active. Check each of these potential causes.
General| Brand | Hisense |
|---|---|
| Model | HS6130 |
| Category | Dishwasher |
| Language | English |
To Next Page