Why is there detergent residue in the Hisense HS6130 compartment?
Detergent residue remains in the detergent compartment of your Hisense Dishwasher because the compartment was damp when you added the detergent. Ensure the detergent compartment is dry before adding detergent.
How to remove spots on stainless steel or silver in Hisense Dishwasher?
Spots on stainless steel or silver in your Hisense Dishwasher can be caused by certain foods like mustard, mayonnaise, lemon, vinegar, salt, and dressings if left on too long. Rinse these foods off before starting the dishwasher or use the Rinse program. Also, contact between different metals like stainless steel and silver can cause spots. Separate these metals when washing.
How to fix spots or films on dishes from Hisense Dishwasher?
Spots or films on dishes from your Hisense Dishwasher can be caused by a leaking water softener, incorrect water softener or rinse aid settings, an empty salt compartment, using 3-in-1 detergent with the TAB setting activated, or excessively high temperatures/detergent amounts when washing crystal. Ensure the salt compartment lid is tight, adjust your water softener and rinse aid settings, refill the salt, and deactivate the TAB setting if using salt and rinse aid separately. If washing crystal, use lower temperatures and less detergent.
What to do if my Hisense HS6130 dishes are not clean?
If your Hisense Dishwasher isn't cleaning dishes effectively, the spray arms may not be rotating due to blockage, or the spray arm holes or bearings may be blocked. Also, the selected program might be unsuitable, or the detergent dosage could be incorrect. Old detergent, incorrect loading, toppled glasses, incorrectly fitted filters, or a missing drainage pump stop can also cause this issue. Check each of these potential causes.
What does F54 error mean on Hisense Dishwasher?
If your Hisense Dishwasher displays error code F54, which indicates overfilling, turn off the water tap.
Why are my dishes not dry enough in Hisense Dishwasher?
If your dishes aren't drying properly in your Hisense Dishwasher, make sure the Auto open option is activated. Also, ensure the dishwasher is fully loaded. Check the rinse aid level and dosage; top up if necessary or increase the dosage. If you're using 3-in-1 detergent, try inactivating the TAB setting and adding salt and rinse aid separately.
Why Hisense HS6130 buttons do not react when pressed?
The buttons on your Hisense Dishwasher may not respond if pressed too soon after opening the door. Wait a moment and try again. Also, the buttons might be dirty, so clean them with a dry or slightly damp cloth. Ensure the door is open, as the buttons only work when the door is open.
General| Brand | Hisense |
|---|---|
| Model | HS6130 |
| Category | Dishwasher |
| Language | English |
To Next Page