9
7. Mounting Remote Control on Wall
□ Note: When remote control is mounted on wall, the receiv er on
indoor unit may fails to receiv e signals from it when the remote
control is manipulated. In such case, remove the remote control
from wall and then manipulate it by pointing it toward the receiv er.
□ The remote control should be mounted at a position accessible to
user, but not at any position as shown below:
□ The following considerations shall be taken into when the remote
control is mounted at a location exposed to electromagnetic wave:
(1) Do not mount the remote control at any location exposed to EMI.
(2) Keep the remote control at least 3 meters away from any device
emitting EMW to minimize interference with signal transmission.
□ Do not mount the remote control at any location exposed to any
flammable gas.
□ When the remote control is mounted on wall, keep it at least 30 cm
away f rom any power supply cable.
Position accessible to children
Position exposed to direct air stream
from air conditioner
Position exposed to cooking fume or
oil drop
Position exposed to humidity
To Next Page
Loading...
