33
Tip: When you highlight a setting, the header text explains the effect of its current value. When you begin to adjust a setting,
the other options are hidden so you can see more of the screen. Even though the other settings are hidden, you can move the
highlight up or down to adjust the other settings.
Options menu settings
TV brightness – Affects the overall brightness of the picture. This setting applies across the entire TV; that is, to all TV
inputs and is identical to the TV brightness setting in the TV picture settings menu.
Picture mode – Provides picture presets for various viewing preferences. This setting applies to the currently-selected input
only.
Picture size – Adjusts the aspect ratio of the picture, enabling you to view a picture in its original format, or zoom or stretch
it to fill the screen. The Auto setting produces the best picture in most cases.
Audio effect – Adjusts the sound quality output from the TV speakers. This setting applies across the entire TV; that is, to
all TV inputs. It does not affect the sound quality from the HDMI (ARC) or SPDIF (TOSLINK) connector.
Sleep timer – Sets a timer that turns off the TV after the specific amount of time. This setting remains in effect even if you
stop watching the current input.
Closed captioning – Controls when you see captions. This setting is only offered for Antenna TV, the AV input, and
streaming videos. Any set value remains in effect across only these inputs.
• Antenna TV – Turn captions on or off, or set them to appear only when the TV sound is muted.
• AV input – Turn captions on or off, or set them to appear only when the TV sound is muted.
• Streaming video channel – Turn captions on or off, set them to appear only when the TV sound is muted, or only during
instant replay (for streaming content that supports instant replay).
NOTE
• If the Instant Replay [
] button is not available on your remote control, you can use [ ] on the Roku App or [Back]
on a universal remote. For more information, see Other devices on page 57. Additional captioning options are provided
in Settings > Accessibility.
SAP – Selects whether to play a secondary audio program or multichannel television sound, and which choice to play. This
setting applies only to Antenna TV on digital channels.
120 Hz – Available in certain models. Enables a higher picture refresh rate that reduces motion blur. If Off, refresh rate is 60
Hz. This setting applies across the entire TV; that is, to all TV inputs.
NOTE
• The 120 Hz setting is also available in the main Settings menu on the TV picture settings screen. The current setting of
the control is identical in both places.
Tip: To dismiss the Options menu, just wait a few seconds without pressing any buttons. Or press [
] again to dismiss the
menu immediately.
Adjusting TV settings
To Next Page
Loading...
Need help?
General