Need help?Do you have a question about the Hisense L5H and is the answer not in the manual?
General| Display Type | Laser TV |
|---|---|
| Screen Size | 100 inches |
| Sound Technology | Dolby Atmos |
| Audio Output | 30W |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Ethernet | Yes |
| Refresh Rate | 60Hz |
| Contrast Ratio | 3000:1 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Resolution | 4K Ultra HD (3840 x 2160) |
| HDR Support | HDR10/HLG |
| Speaker Configuration | 2 Channel |
Connect the inner frame unit and vertical beam using the provided components and screws.
Carefully unroll the screen onto the frame and insert fiber rods into the sleeves for support.
Slide screen edges into tension knobs and tighten screen tension knob screws to specified torque.
Connect long side outer frame pieces using connectors and fasten with screws.
Tear off Velcro release film and attach it to the inner frame as shown in the illustration.
Describes three methods for installing mounting brackets on different wall types.
Hang the screen on the hanging brackets and adjust using rods for horizontal straightness.
To Next Page