LCD TV Service Manual
------------------------------------------------------------------------------------------------------------------------
3. Factory/Service OSD Menu and Adjustment
3.1 To enter the Factory O SD Menu
a. With factory RC (remote control)
1. Press “M” button and enter factory mode.
2. Press “ Menu” button and enter factory OSD menu.
3 . Press “CH+”/“CH-” button select the function menu, press “VOL+”/“VOL-” enter the
selected function menu. Press “VOL+”/“VOL-” button adjust values in the menu.
4. Press “M” button exit factory mode in the factory OSD menu.
When TV outgoing factory,user can not enter factory OSD menu with Factory Remote
b. With user’s RC
1. Power TV On
2. Press Menu button and call up User OSD Menu
3. Select Sound-> Balance
4. When Balance value is “0”, Enter 1->9->6 ->9 in s equence.
Note: If necessary, re-do number keys.
5. Factory OSD appears.
6. Press the standby button then AC turn off and restart the TV, which can exit factory
OSD menu.
3.2 Factory OSD Menu
------------------------------------------------------------------------------------------------------------------------
Hisense Confidential
To Next Page
Loading...
Need help?
General