Hisense LTDN40D50TAM - Page 16

- 19 -
White Balance:
Function:
Item Default Options Notes
1 MODE M M, U
M-Can enter factory mode with
factory RC or user RC.
U-Can enter factory mode only with
user’s RC.
Note: MODE “M” is only used for factory production.
Init:
Colour Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
TO Fac M/U
Power mode last memory
Software update start
Uart bebug on/off
Qingdao
Huangdao
Russia
……