Hisense MTK5657 - FlashTool Upgrading

- 28 -
4.3 Upgrading with the FlashTool v0.6.9.1.exe
1、FlashTool is a green program needing no installation. After Connect the unit to
your pc with a USB-to-serial port cable，run FlashTool v0.6.9.1.exe.
Please refer to
the following steps to set.
.
How to choose Communicate port and flash baud rate? See the following
instruction..
Set *bin file
Select Memory
Card
Select mode
of main chip
Communicate port
Set Flash
Baud Rate
serial port